Hypertherm HTA Rev 6.00 Operators Manual - Manual (Page 88)

74 Operator’s Manual
File name/Diskette file name
The File name /Diskette file name is the name of the file to load from disk/diskette.
Preview
When checked, the Preview checkbox allows the file that is selected in the Files listbox to be
previewed. To check or uncheck the box, press the SPACE key on the keyboard when the Preview
box has the focus.
Load to
The Load to list selects whether you load to the current part or to a directory on the hard disk. To
select a different directory, use the
↑ and ↓ keys on the keyboard. To add a new directory, use the +
key on the keyboard. To remove a directory, use the - key on the keyboard. Note: This selection is
only available if loading from the diskette.
Hard drive file name
The Hard drive file name is the name that you are giving the file you are loading on the hard drive.
Note: This selection is only available if loading from the diskette.
Resume Last Part
The Resume Last Part softkey will be visible when the Rush Job Interrupt or Automated Power Loss
Recovery feature is in use. These features allow the user to pause the current part program and
retain the part and current position information. This then allows the user to load and execute
another part program and return to the original part using the Resume Last Part softkey.
Show Certain Files
This softkey allows the operator to search the selected folder for specific part files by using wildcard
type search tools. Both the asterisk (*) and question mark (?) can be used. To input the asterisk,
press the left shift key (purple) and the backspace key. To input the question mark, press the right
shift key (blue) and the backspace key.
Show All Files
This will allow the operator to switch from the selected “certain files” to viewing all files with the
predetermined file extensions.