Hypertherm HTA Rev 6.00 Operators Manual - Manual (Page 201)

Appendix B: Sensor™ THC 187
Process Watch
Input/Output
In addition to the standard I/O options, the Watch window may be configured to include the status
of the voltage tracking for the Sensor™ THC. This will indicate when the automated voltage
tracking has “Locked On” and is adjusting the torch height based on voltage.
Position
The Sensor™ THC is operated on the control as a separate axis on the control. Position
information for the THC axis may be to position information displayed in the Watch window.
Plasma Process
Information critical to the THC operation may be added to the Lower Location. This information
includes the Actual Arc Voltage, the Set Arc Voltage, Initial Cut Height and Pierce Delay. Values
for the Set Arc Voltage, Initial Cut Height and Pierce Delay maybe adjusted at the main screen to
customize the cut process.