Hypertherm HTA Rev 6.00 Operators Manual - Manual (Page 32)

18 Operator’s Manual
Files
From the Files screen the user may load or save parts on the control or an external location.
Load from Disk
Allows programs to be loaded from the internal disk drives or external mapped drives (network option)
into working memory.
Save to Disk
Allows the current program in memory to be saved to the internal disk drives or external mapped
drives ( network option ). This also accesses the Save Key Logging File screen.
Download from Host
Allows programs to be downloaded from a host computer to the internal disk drives over the selected
RS-232C/ RS-422 serial port.
Upload to Host
Allows programs from the internal disk drives to be uploaded to a host computer via the selected RS-
232C/RS-422 serial port.
Resume Last Part
The Resume Last Part softkey will be visible when the Rush Job Interrupt or Automated Power Loss
Recovery feature is in use. These features allow the user to pause the current part program and
retain the part and current position information. This then allows the user to load and execute
another part program and return to the original part using the Resume Last Part softkey.