Hypertherm HTA Rev 6.00 Operators Manual - Manual (Page 36)

22 Operator’s Manual
Key Functions
These keys activate jogging using the arrow keys when in the
manual mode. Manual key functions (indicated in green) are
available at the Manual, Pause and Align Screens. This keypad is
also used for navigating through a multi-variable dialog box
(indicated in yellow).
The Prev/Next buttons are used to move through the field boxes,
Page Up/Down is used to scroll and the arrow keys are used to
select items in a dialog box.
The alpha–numeric keypad is used to enter numeric data or text.
To enter a number, simply press the key. To enter a word, press
and hold the matching colored shift key (up arrow) while pressing
the desired letter key. The + (plus) and – (minus) keys are used to
add and delete features at selection and check boxes.
Can be pressed at any time (except during cut) to return to the previous menu
without saving any changes. Located above the Cancel key are the \ and :
characters which are used for mapping network drives.
Causes the last number entered/toggled to be accepted. Located above the enter
key are the < and > characters which are used for mapping network drives.
Deletes the current character in the data entry field and backs up one position in the
field. Located above the Back Space key are the * and ? characters which are used as
wild cards to search for files.
Pressing the space key inserts a space into the current data entry field. The space key
is also used to toggle between fixed logic settings ( i.e. setups - preheat sense input
open/closed ). The space key may also be used to add and delete features at selection
and check boxes.
A purple or blue arrow at the left or right edge of the softkeys
indicates that that more softkeys and features are available by
pressing the corresponding shift key on the alpha-numeric
keypad.