Hypertherm HTA Rev 6.00 Operators Manual - Manual (Page 89)

Section 5: Files 75
Resume Last Part Features
Rush Job Interrupt
Rush Job Interrupt allows the user to pause the current part program and retain the part and current
position information. When at the Pause screen, press the Cancel key. A prompt will appear on
screen to ask the user if they wish to save the part information for later use.
If the user selects YES, the Resume Last Part button will be viewable at the Files Screen. The user
can then load and execute another part program and then return to the original part using the
Resume Last Part softkey. The part program and position will be resumed.
Automated Power Loss Recovery
The Automated Power loss recovery uses the Resume Last Part feature similar to the Rush Job
Interrupt. However, the Machine must be “Homed” to ensure proper positioning prior to resuming the
part.
This feature may also be used in the event of an “Overtravel” or similar fault.