Hypertherm HTA Rev 6.00 Operators Manual - Manual (Page 92)

78 Operator’s Manual
Download from Host
The following screen is used to download a part from a host computer. Once all the parameters
below are set, press ENTER on the keyboard to start the download.
Download from
The Download from list selects which directory on the host computer you want to download from. To
select a different directory, use the
↑ and ↓ keys on the keyboard. To add a new directory, use the +
key on the keyboard. To remove a directory, use the - key on the keyboard.
Files
The Files list box contains a list of all the files in the Download from directory that can be downloaded
from the host computer. To scroll through different files, use the
↑, ↓, PAGE UP and PAGE DOWN
keys on the keyboard. To remove a file, use the - key on the keyboard.
To select multiple files to download, highlight the first file selection, then use the
↑ and ↓ keys while
pressing the shift key to highlight the remaining files.
Remote file name
The Remote file name is the name of the remote file that will be downloaded from the host computer.