Chapter 3 base configuration window options, Chapter 3, Base configuration window options – NavCom StarUtil Rev.G User Manual

Page 25: Figure 8: elevation mask controls

Advertising
background image

StarUtil User Guide – Rev. G

Chapter 3 ............................................ Base Configuration Window Options

This chapter is a reference of all the options on the Base Configuration window. This window
contains most (but not all) of the controls that enable the receiver to operate as a base station.

‡

Refer to

Chapter 5 RTK Configuration

for step-by-step procedures to set up a

base station to transmit and a rover to receive RTK corrections via internal or
external radios.

‡

Refer to the Technical Reference Manual for details of the control and output
messages that apply to RTK corrections (see Related Documents in the fore-
matter).

Various Controls That Affect Base Station Operation

Depending on configuration, controls on these windows may affect base station operation:

9

Rover / Navigation & Tracking Setup Window:

Min SV’s For Solution
Max PDOP For Solution
Max RTK Age
Tracking Elevation Mask: if the rover Tracking Elevation Mask exceeds the RTK Base

Control Elevation Mask, tracking will not begin until the Tracking Elevation Mask is
reached. For example, if the Tracking Elevation Mask is 10 and the RTK Base Control
Elevation Mask is 5, RTK corrections won’t be computed until the satellite elevation
reaches 10 (see Figure 8).

Rover Tracking Elevation Mask

RTK Base Control Elevation Mask

Figure 8: Elevation Mask Controls

3-23

Advertising
This manual is related to the following products: