NavCom StarUtil Rev.G - Manual (Page 31)

StarUtil User Guide – Rev. G
Chapter 4 .................Rover / Navigation & Tracking Setup Window Options
This chapter is a reference of all the options on the Rover / Navigation & Tracking Setup
window. This window contains the navigation mode and operational controls to configure the
rover. The options apply to messages 0x47 (SV Tracking Control) and 0x49 (Solution Control).
‡
Refer to Chapter 5 RTK Configuration for step-by-step procedures to set up a base
station to transmit and a rover to receive RTK corrections via internal or external radios.
The available navigation modes on the Rover / Navigation & Tracking Setup window are:
9 RTCM-104 (code)
9 WCT: Not applicable as of January 2008
9
SBAS (WAAS/EGNOS/MSAS/GAGAN): RTCA/DO-229D compliant. Refer to Related
Standards in the fore-matter.
9 RTG: Access to this mode is available only by purchase of a license for the StarFire™
subscription service. Refer to
Chapter 6 StarFire™ Operation .
9 RTK: RTK/UltraRTK™-NCT Proprietary, CMR, RTCM – Access to this mode is available
only by purchase of a license.
9 Non-differential mode: The default if all the navigation modes above are set to Ignore.
Rover / Navigation & Tracking Setup Window
9 Click the icon on the toolbar to configure the rover. The Rover / Navigation & Tracking
Setup window opens (see Figure 16).
‡
To open the window from the menu bar, select Receiver > Setup > Rover /
Tracking and Navigation.
Figure 16: StarUtil-2100 -- Rover / Navigation & Tracking Setup Window
4-29