NavCom StarUtil Rev.G - Manual (Page 72)

StarUtil User Guide – Rev. G
5-70
12. Enter a Network ID. The valid range for a Network ID is 1 to 65535. The rover radio must be
set to the identical ID. The Local Radio/Unit ID is the serial number of the NCT2100 or
NCT-2000 Digital card serial number.
‡
The user may create both a Network ID and a Site ID.
The Network ID may be assigned to one base station or several base stations. The rover
radio set to the identical ID communicates only with the base station(s) with the network
ID. The valid range for a Network ID is 1 to 65535.
The Site ID may be used when it is desirable to have multiple base stations on a single
network ID, but with a separate site ID for each base receiver. The valid range for a site
ID is 0 to 1023. The same Site ID must be set on the Base Configuration window (see
Figure 33) and the Rover / Navigation & Tracking Setup window (see Figure 47).
13. Click the Apply button and the onfirm that the receiver accepts
the setting.
n click the Retrieve button to c
14. Click the OK button to close the Network Configuration window.