Teac HS-2 - Manual (Page 102)

102
TASCAM HS-2
System settings (SYSTEM SETUP)
Make system settings on this screen.
The
SYSTEM SETUP
screen has 3 pages:
PREFERENCES
,
BACKUP STARTUP
,
CLOCK ADJUST
.
Touch the tabs at the bottom of the screen to open the
corresponding page.
PREFERENCES page
Set system preferences on this page.
KBD Type
Set the connected keyboard type to either
US
for English-
language keyboards or
JPN
for Japanese keyboards.
Setting buttons:
US
,
JPN
(default)
Digital Ref. Level
Set the reference level for digital inputs and outputs to a
number of decibels below the maximum level (full scale).
Setting buttons:
–9dB
,
–14dB
,
–16dB
,
–18dB
,
–20dB
(default)
Backup functions of system settings and
preset memory functions
You can Import / Export system files, save/ read user
settings, and select the unit startup settings using the
Backup / Startup
page on the
SYSTEM SETUP
screen.
8System Backup
• You can write all System Backup DATA (including
User Preset DATA) to the selected card using the
Export
button.
• You can read all System Backup DATA (including User
Preset DATA) on the selected card using the
Import
ALL
button to rewrite the built-in memory.
The User Preset DATA read is applied to the
operation of the device.
• You can read only the User Preset DATA from the
SystemBackup DATA on the selected card using the
Import User
button to rewrite UserPreset in the
built-in memory.
User Preset DATA read is not applied to the operation
of the device. Load the User Preset DATA using the
User
button of the
LOAD Preset
in order to apply
it.
If there are no System Backup files, a pop-up window
indicating that the import cannot be performed is
shown.
8Save User Preset
• You can save the current setting values as Preset
DATA in the built-in memory by pressing the
Save
button.
8Load Preset
• Touch the
User
button to load the User Preset DATA
and touch the
Factory
button to load the Factory
DATA (the setting values when shipped out of the
factory).
8Startup Mode
Last Setting : Load the previous settings on
power-on
User Preset : Load the User Preset settings on
power-on
Factory Preset : Load the Factory Preset settings
on power-on
NOTE
• The following backup setting items are subject to
saving and reading of the Preset DATA and are not
included in the project:
Screen name Page name
Applicable setting
item
HOME screen
Time counter display
mode
LOCK SETUP
screen
All settings
PLAY SETUP
screen
CONTROL page
P L A Y IN HIBIT
TIME
S Y N C T / C
screen
CLOCK
page
MASTER
SYNC page Master TC
REMOTE SET-
UP
screen
GENERAL page
FADER MODE
F A D E R S t a r t
MODE
FADER Stop MODE
PARALLEL
page
AUX Assign
RS-232C
page All settings
ETHERNET
page All settings
AUDIO IO-
screen
INPUT page
INPUT SOURCE
SYSTEM SET-
UP
screen
PREFERENCE page
D i g i t a l R e f
Level
Backup/Startup
page
Startup Mode
• User Preset DATA upon shipping from the factory is the
same as the Factory Preset DATA.
• I f p o w e r e d o f f a n d o n w i t h o u t p e r fo r m i n g
SaveUserPreset after changing StartupMode to
UserPreset when the StarupMode settings stored in the
UserPreset memory are LastSetting or FactoryPreset,
the UserPreset settings are loaded.
Then, the StarupMode settings will change to the
LastSetting or FactoryPreset stored in the UserPreset
memory.
In this case, you do not need to load the settngs of
LastSetting or FactoryPreset again. On next startup, the
LastSetting or FactoryPreset settings will be loaded.
10–Internal settings