Teac HS-2 - Manual (Page 75)

TASCAM HS-2
75
In this chapter, we explain how to use the playlist mode.
To use this unit in playlist mode, set the unit’s operation
mode to PLAYLIST MODE. (See “Selecting the operation
mode” on page 44.)
Please refer to “4–Basic operation” on page 29 when reading
this chapter.
Playlist operations
Loading project/sessions
Takes/files can only be added to the playlist from the
folder of the currently loaded session. When takes/
files that are in the folders of other sessions are added
to a playlist they are copied to the folder of the current
session. Load the session first.
1 Press the PROJECT key on the front panel to open
the
PROJECT
screen.
2 Touch the e button for the project that you want
to select to open the session selection screen. If it is
not the current project, a pop-up window appears
confirming that you want to load it. Touch the
OK
button.
3 Touch the name of the session to select it.
Its background appears yellow.
4 Touch the
MENU
button on the session selection
screen to open a pull-up menu.
5 Touch the
LOAD
button in the pull-up menu.
NOTE
You can also load a session by pressing its e button. In
this case, if it is not the current session, a pop-up window
appears confirming that you want to load it. Touch the
OK
button.
6 Touch the
OK
button or press the DATA dial when a
confirmation pop-up message appears.
When loading completes, the last loaded playlist (or a
playlist created by default for a new session) is automati-
cally loaded and the Home Screen reopens.
Creating a new playlist
Create a playlist (JPPA PPL file) in the folder of the current
session.
The following is the path when you see a card on your
computer:
{Card drive name}:¥{Project name}¥{Session name}¥
{_playlists}¥{Playlist file}
1 Press the PROJECT key on the front panel to open
the
PROJECT
screen.
2 Touch the
e
button for the project in which you
want to create a new playlist to open the session
selection screen. If it is not the current project, a
pop-up window appears confirming that you want
to load it. Touch the
OK
button.
3 Touch the
e
button for a session where you want
to create a new playlist to open the playlist selec-
tion screen. If it is not the current session, a pop-up
window appears confirming that you want to load
it. Touch the
OK
button.
NOTE
When you create a session, one JPPA PPL file is created
automatically.
4 Touch the
CREATE PLAYLIST
button to open the
PLAYLIST NAME
screen.
To enter the playlist name, follow the procedures in
“Editing the project name” on page 38.
9–Playlist mode