Teac HS-2 - Manual (Page 18)

18
TASCAM HS-2
7 AES31 File name (button)
This shows the current active AES31 File name (file of
AES31 editing information).
A
*
appears when the timeline has not been saved
after editing (including the addition and removal of
session editing marks)
Touch this area to open a pull-down menu.
START TIME EDIT button
This opens the
START TIME
screen where you can
set the timeline mode starting time. This can only be
selected when stopped.
REBUILD button
This performs a REBUILD (file rescan) when files may
have been deleted or modified from outside the HS-2
(e.g. via FTP).
This can only be selected when stopped.
SAVE button
Save the contents of the timeline.
This can only be selected when stopped.
SAVE AS button
This attaches a name to and saves the content of the
timeline.
This can only be selected when stopped.
(See “Saving AES31 editing information” on page 49.)
CREATE AES31 button
This displays the
AES31 NAME
screen to create a new
AES31 file.
This can only be selected when stopped.
(See “Creating new AES31 editing information” on
page 50.)
IMPORT ALL TAKES button
This imports all takes into the current session.
This can only be selected when stopped.
(See “Importing all the takes” on page 51.)
8 Input monitoring indicators
The indicators at the left end of the level meters show
the status of input monitoring.
The background colors of the indicators stands for the
following depending on the input monitoring.
Playlist Mode
Timeline Mode/
Take Mode
MON OFF
MON ON
9 Level meters
The input signal level is shown when the input
monitor is on, on recording standby, or recording.
Each channel also has an overload indicator at its right
end that appears red when the input overloads.
During playback, the playback level of the track is
shown if input monitoring is set to OFF.
When the input source is set to a digital input, but
there is no input signal or if the input signal differs
from the internal setting, the channel meter display
area appears gray and one of the following messages
appears.
Display Meaning
D-IN NO SIGNAL
No input signal
D-IN UNLOCK
Input signal is not synchro-
nized with the system
D-IN NOT AUDIO
Cbit information of the input
signal is not audio
D-IN Cbit ERROR
Other input signal Cbit infor-
mation differs from the actual
operation mode
D–IN NO SIGNAL shown
The following settings can be made for the display of
the level meters on the
METER SETUP
screen from the
MENU
screen.
• Metering point
• Peak hold time
• Release time
• Overload indicator peak level
• Reference level line display on/off
2−Names and functions of parts