Teac HS-2 - Manual (Page 25)

TASCAM HS-2
25
Security screws
The included security screws can be used to lock the CF
card slot covers.
Use a Phillips head screwdriver to install or remove the
screws.
Protect switch for SD cards
SD cards have a protect switch (write prevention).
Writable Not writable
If you slide the protect switch to the “LOCK” position, you
cannot record or edit files. When you want to record or
delete, unlock the write prevention.
CAUTION
A write protected SD card will check all audio files on the
card every time the device is switched off. As a result, it
takes longer to switch off the device. Editing the timeline
is not possible, either.
About the display
Adjusting the display angle
Push the LCD TILT button to unlock the display, and then
pull the bottom of the display forward to adjust the angle.
Pull the bottom of the display until you hear a clicking
sound.
To restore it to its flat position, push the LCD TILT button
again to unlock the display, and push the bottom of the
display. Push the bottom of the display until you hear a
clicking sound.
CAUTION
Do not push the display screen itself.
Adjusting display and indicator brightness
Turn the DATA dial while pressing and holding the
HOME key to adjust the brightness of the color display,
the PAUSE, REC, PLAY and ONLINE keys, and the JOG
(SHUTTLE), SD and CF indicators. Push and turn the
DATA dial while pressing and holding the HOME key to
adjust only the brightness of the color display.
3−Preparation