Teac HS-2 - Manual (Page 50)

50
TASCAM HS-2
3 When you touch the
SAVE
button on the pull-down
menu, the information will be saved on the select-
ed card.
During saving, the progress status will be shown in
the pop-up window. When saving is complete, the
pop-up window will disappear.
Attaching a name to and saving AES31
editing information
You can attach a name and save the current timeline as
an AES31 file. The file saved will be created in the current
session folder.
1 Press the HOME key on the front panel to open the
Home Screen.
2 Touch the AES31 file name display button on the
Home screen to open a pull-down menu.
3 Touch the
SAVE AS
button on the pull-up menu to
open the
AES31 NAME
screen where you can input
the AES31 DATA file name.
Input the file name. Follow the procedures in
“Editing the project name” on page 38.
4 Touch the
Enter
button on the
AES31 NAME
screen
or press the DATA dial to save the data with input
name.
During saving, a progress bar will be shown in the
pop-up window.
When saving is complete, the pop-up window will
disappear.
NOTE
If a file with the same name already exists, a pop-up
window opens to confirm whether you want to overwrite
that file or not. Touch the
OK
button to overwrite that file,
or touch the
CANCEL
button to return to the
AES31 NAME
screen.
Creating new AES31 editing information
You can create a new AES31 file in the current session
(session that is currently loaded).
1 Press the HOME key on the front panel to display
the Home Screen.
2 Touch the AES31 file name display button on the
Home Screen to display the pull-down menu.
3 Touch the
CREATE AES31
button on the pull-down
menu item to display the
AES31 NAME
screen for
inputting the AES31 editing file name.
Input the file name. See “Editing the project name”
on page 38 for the input method.
7–Timeline mode