Teac HS-2 - Manual (Page 84)

84
TASCAM HS-2
Editing the length and level of fade-in/
fade-out
1 Touch the HOME key on the front panel to display
the HOME screen.
2. Touch the
ADJUST ENTRY
button on the pull-down
menu that is displayed by touching the file name
display button or the title name display button.
The
ADJUST XXX
screen is shown. (“
XXX
” is the en-
try number.)
3 Touch the
Start TC Fade / Level
tab to display
the screen below.
4 Set by rotating the DATA dial after selecting the
knobs of
Fade In
,
Fade Out
and
Level
.
Setting value:
• Fade In / Out Length: 0 – 30 seconds
( 0.1 second per step or 1.0 second per step when the
dial is pressed and rotated)
• Level range: -∞ to +10dB
NOTE
• When the length of the fade-in / fade out is
changed, the value is automatically edited to match
the maximum possible within the playback start /
end time constraints.
• The playback level is shown by the red, solid line.
• The basic level (0dB) is shown by the orange, dotted
line.
Rehearsal playback operation / action
You can perform a rehearsal playback using the transport
controls while on the
ADJUST ENTRY
screen.
• The operation is the same as during normal
transport operation expect that the .
/
/ keys
are used to jump to the Entry's File Start / Start Point
/ End Point and File End positions.
• Change the Start Point / Fade In Length to move
the playback point to the Start Point. If you change
it during the playback, playback will be performed
after the playback point is moved.
• Change the End Point / Fade Out Length to move
the playback point to the point below. If you change
it during the playback, playback will be performed
after the playback point is moved.
When PREVIEW OFF When PREVIEW ON
When changing
EndPoint
Two seconds before
EndPoint
Two seconds before
FadeOut starts
When changing
Fade Out Length
Two seconds be-
foreFadeOut start
point
Two seconds be-
foreFadeOut start
point
• Touch the PREVIEW
button to change the contents
of the rehearsal playback.
Rehearsal playback when PREVIEW OFF is set
• The original audio is played back without the Fade
IN / OUT or Level adjust parameters being applied.
• You can move out of the range of Start / End Point.
• When the End Point is reached during rehearsal
playback, the playback jumps back to the Start Point
and stops.
Press the PLAY key to start playback from the Start
Point.
Transfer to the following End Point is made using the
, . key, / key, SHIFT+ /
key, and by JOG/
SHUTTLE dial operations.
Rehearsal playback when PREVIEW ON is set
• Only the range between the Start / End Point is
played back.
Locating to a point outside of that range is not
possible.
• The audio is played back with the Fade IN / OUT and
Level adjustment parameters applied.
9–Playlist mode