Teac HS-2 - Manual (Page 129)

TASCAM HS-2
129
Digital audio inputs and outputs
DIGITAL IN (S/PDIF) connectors
Connector: RCA pin jack
Input signal voltage amplitude:
200mVp-p to 600mVp-p / 75Ω
Input impedance: 75Ω
Format: AES3-2003 / IEC60958-4 (AES/EBU)
IEC60958-3 (S/PDIF)
Supported sampling frequencies:
44.1/48/88.2/96/176.4/192kHz (Single / Double / Quad)
Note: When SRC is ON, the receivable range is 32 – 192 kHz.
DIGITAL IN (AES/EBU) connector
Connector: XLR–3–31
Input signal voltage range:
200 mVp–p to 10 Vp–p/110Ω
Input impedance 110Ω ±20%
Format: AES3-2003/IEC60958-4(AES/EBU)
IEC60958-3(S/PDIF)
Supported sampling frequencies:
44.1 / 48 / 88.2 / 96 / 176.4 / 192kHz (Single/ Double/ Quad)
Note: When SRC is ON, the receivable range is 32–192 kHz.
DIGITAL OUT (S/PDIF) connectors
Connector: RCA pin jack
Output voltage: 0.5 Vpp ±20% / 75Ω
Input impedance: 75Ω
Format: IEC60958-3 (S/PDIF)
Supported sampling frequencies:
44.1 / 48 / 88.2 / 96 / 176.4 / 192kHz (Single/ Double/ Quad)
DIGITAL OUT (AES/EBU) connectors
Connector: XLR–3–32
Output voltage: 2–5 Vp–p/110Ω
Output impedance: 110Ω ±20%
Format: IEC60958–4 (AES3–2003, AES/EBU)
Supported sampling frequencies:
44.1 / 48 / 88.2 / 96 / 176.4 / 192kHz (Single/ Double/ Quad)
Control inputs and outputs
RS–422 (attached with Option SY-2 board)
Connector: D–sub 9-pin (inch pitch threads.)
RS–232C
Connector: D–sub 9-pin (inch pitch threads.)
PARALLEL
Connector: D–sub 25-pin (inch pitch threads.)
TIME CODE IN (attached with Option SY-2 board)
Connector: BNC connector
Signal voltage amplitude: 0.5–5Vp–p
Input impedance 10 kΩ
Format: SMPTE 12M–1999 compliant
TIME CODE OUT (attached with Option SY-2 board)
Connectors: BNC connector
Signal voltage amplitude: 2 Vp–p
Output impedance: 600Ω
Format: SMPTE 12M–1999 compliant
WORD/VIDEO IN
Connector: BNC
Input voltage: 5V TTL equivalent (WORD IN)
Signal voltage amplitude: 1 Vp–p (VIDEO IN)
Input impedance: 75Ω ±10%
Allowable frequency deviation of external synchroni-
zation: ±100 ppm
Includes switch for enabling termination
Input frequencies (WORD):
44.1 / 48 / 88.2 / 96 / 176.4 / 192kHz
Input signal (VIDEO): 24/25/29.97/30 Frame (NTSC/PAL
Black burst, HDTV Tri–Level)
WORD/VIDEO THRU/OUT
Connector: BNC
Signal voltage amplitude: 5V TTL equivalent
Output impedance: 75Ω ±10%
Output frequency (WORD):
44.1 / 48 / 88.2 / 96 / 176.4 / 192kHz
Frequency stability ±10 ppm or less (Ta = 20º C)
OUT/THRU switch included (OUT is only for WORD OUT)
ETHERNET
Connector: RJ45
Compatibility: 100BASE-TX, 1000BASE-T
KEYBOARD
Connector: Mini-DIN (PS/2)
USB
Connector: USB A-type 4-pin
Protocol: USB2.0 HIGH SPEED (480 Mbps) compliant
REMOTE
Connector: RJ45
Supply voltage: 13 V
Signal: LVDS serial
Transmission contents:
LCD display DATA, asynchronous serial transmission
control signals, port control signals
17–Specifications