Teac HS-2 - Manual (Page 88)

88
TASCAM HS-2
In this chapter, we explain the unit’s internal settings in
detail.
Menu screen
Press the MENU key on the front panel to open the
following
MENU
screen.
REC SETUP button
Make recording settings.
PLAY SETUP button
Make playback settings.
SYNC T/C button
Make synchronization and time code settings.
REMOTE SETUP button
Make settings for external remote control.
AUDIO I/O button
Make settings related to the input and output audio
signals.
METER SETUP button
Make level meter settings.
SYSTEM SETUP button
Make system settings.
VERSION INFO button
Show the system version.
BROWSE button
Display and perform operations on the folders and files
within the SD card, CF card and USB memory device.
MEDIA MANAGE button
Perform operations with the MEDIA
OPERATION MODE button
View and select the system operating mode.
Recording settings (REC SETUP)
The
REC SETUP
screen has three tabbed pages:
REC
MODE
,
FILE FORMAT
and
OPTIONS
. Touch the tabs at the
bottom of the screen to open the corresponding page.
REC MODE page
Make settings related to the recording mode.
• Single
: Recording on only the selected media
storage device (current media). (default value)
• Mirror
: Recording on two media storage devices
simultaneously.
NOTE
When the current project Fs is 88.2k, 96k, 176.4k or
192kHz, the
REC Mode
setting is fixed to
single
, and
cannot be changed.
• Button Display
REC mode setting Display
Single
Mirror
Mirror
(but Mirror recording is not
possible or invalid) (*1, *2)
*1 Conditions that make recording impossible
• Insufficient remaining space on the current media
device.
• The currently selected media is not present.
• The CF card set as current media is not a compatible
media type. (PIO mode)
• The current media storage device is not in a
compatible format.(Except for FAT16 / FAT32)
• A take already exists on either media with a
name that matches the NEXT TAKE NAME details and
that is already at number 999. ( “----“ is shown for the
number on the HOME
NEXT TAKE NAME
screen.)
• The total number of entries in the current folders
of both media storage devices (total number of
files and folders) exceeds the system limitation.
Recording/Editing has been repeated in timeline
mode, the capacity for managing the regions or
edit history has run short, and recording cannot
be performed. (
RecLimit
is shown on the media
storage device remaining space display button.
10–Internal settings