Teac HS-2 - Manual (Page 55)

TASCAM HS-2
55
Copying the data in the selected region
(Copy)
You can copy the selected region.
NOTE
• The copied data will be saved in the copy buffer.
• When the whole fade (in/out) area is included, the fade
information will also be retained.
&RS\ EXIIHU
6HOHFWHG UDQJH
1 Press the HOME key to display the Home Screen.
2 Touch the
EDIT MODE
button to enter the edit
mode.
3 Move the timeline cursor to the region to copy.
4 Touch the
SET/SELECT
button and select the re-
gion you want to copy using the
SET IN
,
SET OUT
and
SELECT Region
buttons on the pull-up menu.
5 Touch the
EDIT
button to display the pull-up menu.
6 Touch the
Copy
button on the pull-up menu. When
copying is complete, the Home Screen will be dis-
played after the pop-up window is displayed.
In this case, the
EDIT
pull-up menu will remain open.
Cutting the data in the selected region (Cut)
You can erase the selected region and move the following
data forward.
NOTE
• The data cut is saved on the copy buffer.
• When the whole fade (in/out) area is included, the fade
information will also be retained.
• When the IN point or OUT point is within the region,
the parts outside of the designated region will become
a new region.
• When the IN point or OUT point is set in the section of
fade-in / fade-out, the fade-in and fade-out information
will be deleted.
1 Press the HOME key to display the Home Screen.
2 Touch the
EDIT MODE
button to enter the edit
mode.
3 Move the timeline cursor to the region to cut.
4 Touch the
SET/SELECT
button and select the re-
gion you want to cut using the
SET IN
,
SET OUT
and
SELECT Region
buttons on the pull-up menu.
5 Touch the
EDIT
button to display the pull-up menu.
6 Touch the
Cut
button on the pull-up menu. When
cutting is complete, the Home Screen will be dis-
played after the pop-up window is displayed.
In this case, the
EDIT
pull-up menu will remain open.
7–Timeline mode