Teac HS-2 - Manual (Page 112)

112
TASCAM HS-2
Manual locate function
You can directly input a time and locate to it.
Touch the
Manual Locate
button on the Home Screen
to open the
MANUAL LOCATE
screen.
Touch the
FRAME EDIT
button to set whether or not the
frame value can be edited.
FRAME EDIT on
FRAME EDIT off
There are three locate modes as follows.
ABS
: Input an actual time and locate to it.
+
: Input an amount of time to go forward from the
current time.
–
: Input an amount of time to go backward from the
current time.
Input the time using the number buttons.
You can also select a number field in the
LOCATE
area and
use the DATA dial to adjust the time.
Touch the
LOCATE
button to locate to that new time and
return to the Home Screen.
Touch the
CLEAR
button to clear all input values.
TIP
This can also be input using an externally connected
keyboard. Press the keyboard’s Enter key to confirm a
setting and its ESC key to clear all the values.
11–Mark and locate functions