Teac HS-2 - Manual (Page 60)

60
TASCAM HS-2
6 Touch the
Paste File
button after selecting a file
to paste on the
BROWSE
screen displayed.
7 Touch either the
Current Position
or
File T/C
button to start pasting when the pop-up window
to select the pasting position is displayed.
Then, select the
CANCEL
button to return to the
BROWSE
screen.
NOTE
If the selected file contains no time code information
when the F
ile T/C
button is touched, the file is pasted
at [ 00 h 00 m 00 s 00 f ].
NOTE
If you select a file from other than the current session
folder, the file is copied to the current folder and then
pasted.
A pop-up window showing
Cannot Copy.
is displayed
when a file with the same name exists in the current
session folder.
To change the file with the same file name, touch the
RENAME
button, or touch the
CANCEL
button to cancel.
8 When pasting is complete, the Home Screen will
be displayed after the pop-up window is displayed
and the
EDIT
pull-up menu is closed.
Setting Fade In/ Fade Out for the designated
region (Fade IN/ Fade Out)
You can set fade in/fade out for the designated region.
NOTE
The fade-in/fade-out ranges are indicated in light blue.
1 Press the HOME key to display the Home Screen.
2 Touch the
EDIT MODE
button to enter the edit
mode.
3 Move the timeline cursor to the end of fade in and
the beginning of fade out on the region where you
want to set fade in/fade out.
4 Touch the
Fade / Level
button to display the
pull-up menu.
• To set fade in, touch the Fade IN
button.
• To set fade out, touch the Fade Out
button.
5 When setup is complete, the Home Screen will be
displayed after the pop-up window is displayed.
In this case, the
Fade / Level
pull-up menu will
remain open.
7–Timeline mode