Teac HS-2 - Manual (Page 74)

74
TASCAM HS-2
Undoing the previous take edit (UNDO)
You can undo the previous take edit (divide/combine).
1 Press the HOME key to display the Home Screen.
2 Touch the
EDIT
button to display the pull-up menu.
Touch the
UNDO
button on the pull-up menu.
3 When the edit is undone, the Home Screen will be
displayed after the pop-up window is displayed.
In this case, the
EDIT
pull-up menu will remain open.
NOTE
• If no editing has been conducted, the UNDO
button is
disabled. The
UNDO
button appears with white letters
when it is possible to undo an edit.
• The take mode edit history will be erased by the
following actions:
• Turning off the power of this unit
• Loading a project or session
• Changing the operation mode
• Recording
Redoing the previously undone take edit
(REDO)
After undoing an edit, you can redo it.
1 Press the HOME key to display the Home Screen.
2 Touch the
EDIT MODE
button to enter the edit
mode.
3 Touch the
EDIT
button to display the pull-up menu.
Touch the
REDO
button on the pull-up menu.
4 Touch the
REDO
button on the pull-up menu. When
the edit is redone, the Home Screen will be dis-
played after the pop-up window is displayed.
In this case, the
EDIT
pull-up menu will remain open.
NOTE
• If no edit has been undone, the REDO
button is
disabled. The
REDO
button appears with white letters
when it is possible to redo an edit.
• The take mode edit history will be erased by the
following actions:
• Turning off the power of this unit
• Loading a project or session
• Changing the operation mode
• Recording
8–Take mode