TA Triumph-Adler CX 8682 - Manual (Page 12)

INSTALLATIONS AND SETTINGS ON THE SERVER-PC
12 U1 Plot
Installations and settings on the Server-
PC
This chapter explains,
• What system requirements must be fulfilled for the server,
• How to install the drivers and the program
• What adjustments you have to make to the operating
system settings.
Furthermore, a separate section lists all the new [sub-]
directories and file types that you will find on your hard disc
following installation.
Attention: Adjustment of the settings in the operating
system and installation of the program should only be
carried out by a user with administrator rights.
System requirements
Please read through the following recommendations carefully.
They can be very helpful in finding the optimum hardware for
your needs.
• Operating system:
Microsoft Windows 2000 Professional with ServicePack 1 or
ServicePack 2
• Processor:
Pentium III, at least 800 Mhz
Athlon, at least 800 Mhz
• Front Side Bus:
133 Mhz (Pentium III)
200 Mhz (Athlon)
• PCI Bus: The PCI bus system must meet up-to-date
standards (PCI 2.0 or higher – 3.3 V or 5 V autoadaptive,
maximum load 5 A). If your computer does not fulfill this