Installation problems – TA Triumph-Adler CX 8682 User Manual
Page 27
INSTALLATIONS AND SETTINGS ON THE SERVER-PC
U1 Plot 27
Installation Problems
PC doesn’t start
The Controller-Board is defective. Use another board.
Kernel driver does not start
Error in COMPAQ BIOS I. Especially on COMPAQ computers
the controller does only work, if the PC is equipped with at least
128 MB of RAM memory.
Make sure that your COMPAQ PC has at least 128 MB of RAM
memory.
Plotting speed too slow
• Lack of RAM memory on PC. If the PC is „swapping“ all the
time (the harddisc is continuously operating), add more
memory to your PC. If you are not sure add at least 256
MB.
• CPU blocked by other application. Shutdown other
application.
• Usage of complex data formats. When using Postscript or
CGM data the processing time is quite high. For highest
performance use HPGL or TIFF data format.