TA Triumph-Adler CX 8682 - Manual (Page 98)

JOB EDITOR
98 U1 Plot
You can change the pen sizes and the gray values aside from
black and white. These settings will be saved as default settings.
Calcomp - Pens
The pen attributes are set on the “pens“ tab:
• Size:
The pen widths are entered directly using the keyboard in the
first column under “Size“. The maximum values that can be
entered depend on the size unit, which you set in the
configuration program. The current valid size unit is shown in
the status bar at the bottom of the monitor.
If you want to “remove” a pen, you can set the pen widths as
“0“ or as the pen color “white“.
The standard values for the pen widths of the 16 Calcomp pens
are given in the appendix (Chapter “CalComp commands and
pens“).
• Color:
Select the pen color from the second column under “color“.
Open the pull down menu and select the required color. If you
want to “remove“ a pen, you can set the pen color as “white“ or