TA Triumph-Adler CX 8682 - Manual (Page 72)

JOB EDITOR
72 U1 Plot
Note: All basic settings only apply for newly added
entries except for the number of copies.
• Formats:
Use this section of the tab to select the drawing format, for the
drawing print. Apart from “Original“, “Window“ and “Percent“,
you will also find the drawing formats that are the usual
standards used: ISO A, ANSI A-E and ARC A-E.
Note: If you use the bypass tray to place paper or an
other medium, you can use all formats, also ISO B, C.
However you have to place the drawing in the
„portrait“ position.
In the “Original“ format setting the program obtains the format
size from the original drawing file. This is the preset.
If you use the “Window“ format setting, you can freely adjust the
format width and height values, whereby the format size is given