TA Triumph-Adler CX 8682 - Manual (Page 26)

INSTALLATIONS AND SETTINGS ON THE SERVER-PC
26 U1 Plot
As a standard spooler folder is set on c:\spool\cfg. If you
installed the spool folder of U1 Plot on another drive, you
have to change the drive path.
Updating U1 Plot
To update the program, please proceed as follows:
1. Start for Windows 2000 installation as a user with
administrator rights.
2. If Windows 2000 has already been started [with
administrator rights], close all programs that are running
and secure all the data.
3. Place the new installation CD in your drive. The installation
program is now started automatically. If not, open the
Windows Explorer window and double click on the
“Setup.exe“ file in the “Install“ CD-folder.
4. After the setup program has detected an old program
version of U1 Plot, a new window will be opened:
You have to delete the old version first. If you want to do
this click “Ok”.
5. When the older version has been removed you can start the
setup.exe again. If you have updated U1 Plot, you also have
to update the U1 PLOTCLIENTS. Follow the instructions of
the manual U1 PLOTCLIENTS or the corresponding section
of the Installation Manual.