TA Triumph-Adler CX 8682 - Manual (Page 35)

PROGRAM SEQUENCE
U1 Plot 35
The following file formats can be read by U1 Plot, if a
corresponding license has been purchased:
• CGM......................................................................(*.cgm)
• PDF, Postscript ................................................. (*.pdf, *.ps)
The following are available with AutoCAD 2000 or 2000i
installed:
• DWG .....................................................................(*.dwg)
Note: A more precise definition of the file formats that
can be used is given in the appendix.
A second possibility is to produce the drawing using U1 Scan
and to save it in the suitable format.
2. TRANSFER:
The [technical] Draftsman/woman transfers the files with the
drawings to the user, who uses U1 PLOTCLIENT to put
together the print jobs. The files are then sent via the network
[LAN, Intranet or Internet] to the directories provided.
3. DRAG & DROP:
The user fetches all the drawings intended for plotting into
U1 PLOTCLIENT either using Drag & Drop or using the
“Insert or add entry “ functions.
4. SET CREATING and PLOT SETTING:
The user puts together the drawings in U1 PLOTCLIENT to
form jobs, assigns the priorities for the print, sets the
formats, media types, border settings and much more and
checks the drawing using the check view.
5. SENDING PLOT FILE:
As soon as the user has prepared the jobs, they
automatically send it via the network [LAN] using the
program command “File – Print SSL“ to the directories
provided, thus making it available for U1 Plot to print.
You can change or create a SSL file. Please ask your dealer
or support technician for further details about creating a SSL
file.