TA Triumph-Adler DCC 2520 - Manual (Page 136)

Printer Settings
3-42
Setting Resource Protect Mode
When this devicer's emulation switches from PCL 6 to another emulation type, all downloaded files
and macros are lost. Set the Resource Protect Mode to Protect or Permanent to protect the PCL
environment and preserve those resources for use when again returning to PCL 6 emulation.
1 Press the Printer key.
2 Press [Printer Menu].
3 Press [Others].
4 Press [S] or [T] to select Resource
Protect and press [Change #].
5 Press [Off], [Permanent] or [Permanent/Temporary].
6 Press [Close]. The display returns to the Others screen.
7 Press [Close]. The display is returned to the Printer menu screen.
Auto continue
When an error occurs, automatically continues printing from the next received data after the
specified period of time. The default setting is [Off] (No auto continue). Auto continue can continue
printing after the following errors.
• Print Overrun Press GO.
• Memory overflow Press GO.
You can also specify the time delay before Auto continue.
1 Press the Printer key.
2 Press [Printer Menu].
Item Description
Auto Saves permanent PCL resources such as fonts, macros, and symbol sets in this
device's memory when switching emulation types. Temporary resources,
however, are released.
Protect Saves permanent and temporary PCL resources in this device's memory when
switching emulation types.
Off No resources are protected.
Page Set
Print
Paper
RAM DISK
Mode
Close
item.
Font
Color Mode
Handling
Quality
Others
Others
Printer menu
Off
Service
Value Setting Item
Form Feed Time Out
Resource Protect
Auto Continue
Finishing Error
Permanent
30 .
Change #
Sec.