TA Triumph-Adler DCC 2520 - Manual (Page 23)

Copy Functions
1-7
Orientation of Original Document
Orientation of the original must be specified to to use the following functions.
• Duplex Mode
• Split Mode (separate copies from two-sided originals)
• Margin Mode
• Auto Center
• Border Erase
• Combine Mode
• Memo Pages
• Page Numbering
• Booklet
• Stapling (optional feature)
• Punching (optional feature)
Placing originals on the platen
Placing originals in the optional document processor
NOTE: The default setting for the original orientation may be changed. For further details, refer to
Orientation of Original Document on page 7-20.
Follow the steps as below to specify the original orientation.
1 Place the original.
2 Press [Function] and then press [T Down].
3 Press [Orig. Set Direction].
Original [Top Edge]
([Back Edge])
[Left Top Edge]
([Left top corner])
Original [Top Edge]
([Back Edge])
[Left Top Edge]
([Left top corner])