TA Triumph-Adler DCC 2520 - Manual (Page 281)

System Menu
7-33
Color Registration
When first installing the machine or moving it to a new location, color drift during printing may occur.
Use this function to correct the color position of each of cyan, magenta and yellow to resolve color
drift.
Normal registration and detailed settings are available for Color Registration. Color drift can be
largely corrected through normal registration. However, if it is not resolved or to perform more
detailed settings, use the detailed settings.
NOTE: To perform color registration, verify that either 11 × 8
1/2
" or A4 paper is loaded into a
cassette.
Normal Registration
Follow the steps below to correct normal color drift.
1 Press the System Menu/Counter key.
2 Press [User Adjustment].
3 Press [Color Regist.] ([Colour Regist.]).
4 Use numeric keys to enter the 4 digit management code. The default setting is 2500 for the 25/20
ppm model and 3200 for the 32/25 and 32/32 ppm models.
If the correct code has been entered, the Color Regist screen will be displayed.
NOTE: For security, it is recommended to change the management code. For further details, refer
to Changing Management Code on page 7-25.
If the optional security kit has been installed, the management code is 8 digits long. The default
setting is 25002500 for the 25/20 ppm model and 32003200 for the 32/25 and 32/32 ppm models.
m Menu / Counter
Close nt
Calibrat.
Color
Regist.
Color
refresh
Drum
refresh
Developer