TA Triumph-Adler DCC 2520 - Manual (Page 140)

Printer Settings
3-46
5 Press [Print Status Page].
6 Press [Printing].
Processing message is displayed and printing of the service status page begins.
7 When printing is complete, the screen returns to printer mode.
Printer Reset (Reboot)
Reset the printer function only without switching off ({ position) the main power switch.
1 Press the Printer key.
2 Press [Printer Menu].
3 Press [Others].
4 Press [Printer Reset].
Only printer board is working without
turning off the main SW. Are you sure?
is displayed
5 Press [Yes]. The printer board reboots.
Dump Received Data
Print a hexadecimal output of received data for program or file debugging.
1 Press the Printer key.
2 Press [Printer Menu].
Print Sta-
A4
Standard
Service
tus Page
sizes
Paper Feed
Operation
Printer menu Others -
Page Set
Print
Paper
RAM DISK
Mode
Close
item.
Font
Color Mode
Handling
Quality
Others
Close
Off
Service
Printer
Value Item
ime Out
otect
e
or
Permanent Reset
Print
HEX-DUMP
30 .
Change #
Sec.