TA Triumph-Adler DCC 2520 - Manual (Page 42)

Copy Functions
1-26
Booklet from Sheets
Delivers booklet of two-sided copies with facing pages from one-sided or two-sided originals.
Booklets such as magazines can be created by folding at the center. Also, thick paper or colored
paper may be inserted as a cover page.
Paper for the cover page is fed from the MP tray. To supply cover paper from a cassette, refer to
Specifying Cassette for Cover Paper on page 7-7.
NOTE: Paper sizes available for booklet (sheet original) are limited to 11 Ч 17", 8
1/2
Ч 14",
11 Ч 8
1/2
", 8
1/2
Ч 11", A3, B4, A4, A4R, B5 and B5R.
Use the optional 3000 sheet document finisher and folding unit to bind&fold (staple down the middle
of the finished output and fold in two). For this operation, the available paper sizes are limited to
11 Ч 17", 8
1/2
Ч 14", 8
1/2
Ч 11", A3, B4 and A4R.
For binding on the left side
The folded copies can be read from left to right.
For binding on the right side
The folded copies can be read from right to left.
For top binding
The folded copies can be read from top to bottom.
Follow the steps as below for these booklet types.
1 Press [Function].
2 Press [Booklet].
Original Copy
Original Copy
Original Copy