TA Triumph-Adler DCC 2520 - Manual (Page 332)

Troubleshooting
9-8
Cannot staple this size.
(Cannot staple this paper size.)
Is stapling available for the size of
the loaded paper? For further
details, see the optional document
finisher or 3000 sheet document
finisher Operation Guide. Change the paper size. —
Cannot punch this size.
(Cannot punch this paper size.)
Is punching available for the size of
the loaded paper? For further
details, refer to the optional 3000
sheet document finisher Operation
Guide. Change the paper size. —
Cannot staple.
## :maximum capacity (Staple)
(Cannot staple.
## :Max. staples)
Is the maximum page quantity for
stapling exceeded? For further
details, see the optional document
finisher or 3000 sheet document
finisher Operation Guide. Decrease the number of sheets to
be stapled to less than the maximum
staple sheet count. —
The top tray is full of paper.
Remove paper, and press "Start"
key. During copying, is the maximum
capacity of the output tray
exceeded? Remove some pages from the
output tray and press the Start key.
Printing continues. —
The top tray is full of paper.
Remove paper, and press
"Continue" key. During printing, is the maximum
capacity of the output tray
exceeded? Remove some pages from the
output tray and press [Continue].
Printing continues. —
Finisher paper capacity
exceeded. (Tray #)
Remove paper, and press "Start"
key. During copying, is the maximum
capacity of the optional document
finisher or 3000 sheet document
finisher output tray exceeded? Remove some pages from the
optional document finisher or 3000
sheet document finisher and press
the Start key. Printing continues. —
Finisher paper capacity
exceeded. (Tray #)
Remove paper, and press
"Continue" key. During printing, is the maximum
capacity of the optional document
finisher or 3000 sheet document
finisher output tray exceeded? Remove some pages from the 3000
sheet document finisher and press
[Continue]. Printing continues. —
Remove paper. Finisher tray. Is the maximum capacity of the
optional document finisher output
tray exceeded? Remove some pages from the
optional document finisher. —
These functions cannot be
combined. Have you selected functions that
cannot be used together? Check the settings. —
Exceeds pre registered copying
quantity.
(Copy limit for this ID-code has
been reached.)
Is the maximum limit for copying as
specified in Job Accounting mode
exceeded? The copy volume has been reached
the set limit of your department. No
additional copying is possible. Clear
the copy count in Job Accounting. page 8-13
Unable to copy. (Full-Color)
Job Accounting capacity has
limit.
(Cannot copy. (Full Col.)
Job Accounting capacity has
limit.)
Is full color copy set to [Is not
permitted] ([Is not permited]) in Job
Accounting? Change the restriction setting for full
color copy in Job Accounting. page 8-5
Unable to copy. (Full-Color)
Exceeded the limitation of Job
Accounting.
(Cannot copy. (Full Col.)
Exceeded the limitation of Job
Accounting.)
Is the maximum limit for copying as
specified in Job Accounting mode
exceeded? Clear the copy count in Job
Accounting. page 8-13
Display Checkpoints Corrective Actions Reference
Page