TA Triumph-Adler DCC 2520 - Manual (Page 176)

Setting Scanner from a Web Browser
5-10
4 Check the box to the left of the protocol
name to enable filtering for that protocol.
5 Up to 4 IP address ranges can be enabled for filtering. To filter a single IP address, only enter the
Starting Address.
6 Click the Registration button.
NOTE: The setting shown in the screen
only allows access from the IP address
range 10.10.10.1 - 50 and from IP
address 10.10.10.125 to the scanner's
home page (HTTP) and Address Editor.
Scanner Default Setting
Configure image scanning related default settings for the scanner. The settings items are Basic
Setting and Extension Setting. Click Extension button to show Scanner Default Setting
(Extension).