TA Triumph-Adler DCC 2520 - Manual (Page 58)

Copy Functions
1-42
Selecting Output Destination
The optional job separator, document finisher, 3000 sheet document finisher or mailbox can be
specified as copy output destinations.
NOTE: Requires the optional job separator, document finisher, 3000 sheet document finisher or
mailbox.
Change the default destination for copies in default settings mode. For further details, refer to
Selecting Output Destination on page 7-22.
Follow the steps as below to select the output destination.
1 Press [Function] and then press [T Down].
2 Press [Select of Output].
3 Select the output destination.
4 Place the original and press the Start key. Copying begins.
Paper Output Description
Top tray Outputs to the built-in output tray.
Job separator Outputs to the optional job separator.
Finisher tray Outputs to the optional document finisher tray.
Tray A Outputs to Tray A of the optional 3000 sheet document finisher.
Tray B Outputs to Tray B of the optional 3000 sheet document finisher.
Tray C Outputs to Tray C of the optional 3000 sheet document finisher.
Tray 1 - 7 Outputs to Trays 1 - 7 (1 is the uppermost tray) of the optional mailbox.
Select of Output
Job
Top tray
Back
Paper Size
100%
separator
Shortcut
Ready to copy. ( ) Full-Color
Tray A
Tray B
Tray C
Tray 1
Tray 2
Tray 3
Tray 4
Tray 5
Tray 6
Tray 7
11Ч8