Scanner error codes – TA Triumph-Adler DCC 2520 User Manual
Page 342
Troubleshooting
9-18
Scanner Error Codes
Below is a list of scanner send log error codes and their corrective actions.
Error Code
Detail Contents
Corrective Actions
Reference
Page
E001
User initiated cancel during send.
—
—
E010
Connection to destination PC lost during
data transmission (an error greater than
E011 has occurred that cannot be further
categorized). Or, connection to the
computer running Address Book for
Scanner (Private Address Book) has been
lost.
•
Confirm that there is no link fault by checking
whether the network cable is properly
connected.
•
Check that the destination PC is running
properly.
Refer to
Operation
Guide,
Chapter 2
E011
Transmission aborted due to error in
transmitted image data.
Retry the operation.
—
E012
Access to Address Book for Scanner
(Private Address Book) data during image
transmission was lost due to a line fault.
Check that the computer running Address Book
for Scanner (Private Address Book) is properly
connected.
—
E020
Connection to SMTP server lost while
opening E-mail transmission.
Confirm that there is no link fault by checking
whether the network cable is properly
connected. Otherwise, ask your system
administrator or support personnel to check that
the SMTP server is working properly.
Refer to
Operation
Guide,
Chapter 2
E021
Receive blocking is configured at the e-mail
destination or e-mail address not allowed
as a destination in destination permission
settings.
•
Check the list of restricted destination
domain settings and adjust setting as
necessary.
•
Check that the destination e-mail address
has been correctly entered.
E022
Recipient(s) list includes e-mail address not
recognizable by SMTP server.
Check that the destination e-mail address has
been correctly entered.
—
E023
SMTP server not functioning correctly.
Ask system administrator or support personnel
to verify SMTP server is functioning properly.
—
E024
SMTP Authentication error.
Check with the system administrator that the
user account and password used in SMTP
authentication are correctly configured.
E030
Unable to recognize destination PC.
Scanner File Utility not running or already
connected to another scanner.
•
Verify that Scanner File Utility is running on
the destination PC and if it is currently
connected to another scanner.
•
Confirm that there is no link fault by checking
whether the network cable is properly
connected.
Refer to
Operation
Guide,
Chapter 2
E031
Scanner password and destination PC
password do not match when preparing for
image transmission.
Check the destination PC password.
—
E032
During Scan to PC, destination PC hard
disk usage limit exceeded.
Try again after increasing available space on the
destination PC hard disk.
—
E033
Version of the Scanner File Utility is
different.
Check the Scanner File Utility version.
—
E034
Scanner File Utility connected to another
scanner. Send failed.
Try Scan to PC again after closing connection to
another scanner.
—
E035
No match for Scanner File Utility folder
number during group send. Configuration
change was made during send operation.
Check the Scanner File Utility settings.