Batch scanning, File name – TA Triumph-Adler DCC 2520 User Manual
Page 158
Scanner Settings
4-16
Batch Scanning
Configure batch scanning for default settings mode. The setting items are as follows.
For further details on batch scanning, refer to page 4-8.
1
Referring to Accessing the Setting default function Screen on page 4-12, access the Setting default
function screen.
2
Press [S] or [T] to select Batch Scanning and press [Change #].
3
Select [On] or [Off].
4
Press [Close]. The display returns to the Setting default function screen.
One Page Per File
Configure One Page Per File for default settings mode. The setting items are as follows.
For further details about One Page Per File, see page 4-9.
1
Referring to Accessing the Setting default function Screen on page 4-12, access the Setting default
function screen.
2
Press [S] or [T] to select One Page Per File (Output Each Page) and press [Change #].
3
Select [On] or [Off].
4
Press [Close]. The display returns to the Setting default function screen.
File Name
Set the scanner image filename for default settings mode.
NOTE: Enter the filename using less than 16 characters.
For further details on scanner image file name, refer to page 4-5.
1
Referring to Accessing the Setting default function Screen on page 4-12, access the Setting default
function screen.
2
Press [S] or [T] to select File Name and press [Change #].
3
Press [Change].
4
Enter the filename and press [End].
5
Press [Close]. The display returns to the Setting default function screen.
Item
Description
On
Enables batch scanning.
Off
Disables batch scanning.
Item
Description
On
Enables One Page Per File.
Off
Disables One Page Per File.