TA Triumph-Adler DCC 2520 User Manual
Page 329
Troubleshooting
9-5
Printing is wrinkled.
Is the separator dirty?
Clean the separator.
Refer to
Operation
Guide,
Chapter 5
Is the copy paper damp?
Replace the copy paper with new paper. Refer to
Operation
Guide,
Chapter 2
Is special color copy paper being used? Use special color copy paper.
—
Is the paper set in a proper orientation? Change the orientation in which the
paper is positioned.
—
Image portion of originals
is too light when
continuous printing
originals with
photographs or other
images.
High exposure printer setting value.
From the high exposure printer setting,
select [Image Quality Priority] or [Image
Quality Highest Priority].
Unable to print.
Is the machine plugged in?
Plug the power cord into an AC outlet.
—
Is the machine switched on?
Turn the main power switch to on
( | position).
—
Is the printer cable connected?
Confirm the printer cable is securely
connected.
Refer to
Operation
Guide,
Chapter 2
Was the printer switched off when
connecting the printer cable?
Switch on the printer after connecting
the printer cable.
Refer to
Operation
Guide,
Chapter 2
Is the device in Offline mode?
Press the Printer key and press [GO] to
restore Online mode.
—
Characters are not
printed correctly.
Is the printer cable connected?
Confirm the printer cable is securely
connected.
Refer to
Operation
Guide,
Chapter 2
Are the computer settings configured
correctly?
Confirm printer driver and application
software settings.
—
Print output is not correct. Are the computer settings configured
correctly?
Confirm printer driver and application
software settings.
—
Symptom
Checkpoints
Corrective Actions
Reference
Page