Panasonic TH-86EQ2W 85.6" 4K Digital Signage Display - Manual (Page 112)

112
English
[Server]
Configure the setting required to access the Display assigned to a server using the control system.
[Use TLS]
Sets the secure communication.
[Disable]:
Performs the unsecured communication.
[Enable]:
Performs the secure communication using TLS
(Transport Layer Security).
[IP ID]
Sets the IP ID used to determine the Display on the
network. (A number up to four digits)
[Non Secure Port]
Sets the port number to be used with the unsecured
communication.
Default value: 41794
[Secure Port]
Sets the port number to be used with the secure
communication.
Default value: 41796
[Authentication]
Select the authentication with the connection
destination used with the secure communication.
[Disable]:
Does not perform the connection authentication.
[Enable]:
Performs the connection authentication.
[User Name]
Enter the user name used for the connection
authentication. (Up to 20 half-width characters)
[Password]
Enter the password used for the connection
authentication. (Up to 20 half-width characters)
[Crestron Fusion in the Cloud (FITC)]
Sets whether to use the Fusion server in the Cloud.
[Disable]:
Does not use the Fusion server in the Cloud.
[Enable]:
Uses the Fusion server in the Cloud.
[FITC URL]
Enter the URL of the Fusion server in the Cloud.
[Submit]
Updates the [Server] setting.
Note
● [Use TLS] will be fixed to [Disable] if neither the server certificate nor the self-signed certificate is installed.
● When [Use TLS] is set to [Disable], [Authentication] is fixed to [Disable], and [Secure Port] cannot be set.
● When [Crestron Fusion in the Cloud (FITC)] is set to [Disable], [FITC URL] cannot be entered.