Select the language with and press <enter, Configure the network account setting as necessary – Panasonic TH-86EQ2W 85.6" 4K Digital Signage Display User Manual

Page 34

Advertising
background image

34

English

To turn the power ON/OFF with the remote

control

To turn the power on

When the <Main power switch> is ON ( ) (Power

Indicator - orange or purple), press <Standby (ON/

OFF) button> then the picture will be displayed.

Power Indicator: Blue (Picture is displayed.)

To turn the power off

When the <Main power switch> is ON ( ) (Power

Indicator - blue), press <Standby (ON/OFF) button>,

then the power will be turned off.

Power Indicator: Orange or purple (standby)

Note

During operation of the “Power management” function

(see page 61), the power indicator turns purple in the

power off state.

After the power plug is disconnected, the power

indicator may remain lit for a while. This is not a

malfunction.

The display turns off if the <Main power switch> is

turned OFF ( ) or press the <Main Power On / Off

button> (

) on the unit while the unit is ON (picture

is displayed) or OFF (standby state).

When [Power LED light-up setting] is set to [Off],

the power indicator does not light up. (see page 86

[Power LED light-up setting])

When the Unit is turned on for the first time

Following screen will be displayed.

1

Select the language with and

press <ENTER>.

English (UK)

Deutsch

Français

Italiano

Español

ENGLISH (US)

Русский

OSD language

2

For vertical installation, select

[Portrait] with and press

<ENTER>.

Display orientation

Landscape

Portrait

Note

Once the items are set, the screens won’t be

displayed when switching on the unit next time.

Each item can be reset in the following menus.
[OSD language] (see page 68)
[Display orientation] (see page 86)

3

Configure the network account setting

as necessary.

Administrator account settings

Password policy

Save

Skip

Password

User name

dispadmin

Please set the user name and password.If not set,

could not use the Web Control function and for communication

control via a LAN (including Panasonic application software).

Password policy

Cautions regarding the password setting in this item

are displayed on another window.

Password policy

·Reusing passwords is not recommended.
·Password cannot be blank.
·A password consisting of at least eight half-width characters and contaning

characters of at least three of the following four types is recommended.
·Uppercase letters
·Lowercase letters
·Digits
·Symbols (~!@#$%^&*()_+|}{][<>.,/?`)

User name

A keyboard for user name setting is displayed. Enter

the user name.

Entering characters (see page 165)

Password

A keyboard for password setting is displayed. After

the password is entered, select [Ok] to display a

confirmation screen. Enter the password again and

select [Ok] to determine the password.

Save

The user name and password set above are saved

in the display unit.

Skip

Exits this screen without configuring this setting.

Note

Once set or skipped, this screen won’t be

displayed when switching on the unit next time.

Use the following menu to configure the setting

again.
[Network settings] (see page 74)

Advertising