Panasonic TH-86EQ2W 85.6" 4K Digital Signage Display - Manual (Page 137)

137
English
■
Setting menu
The setting menu for the built-in applications including WhiteBoard is as follows.
Guide text: Used to set the text displayed under the buttons on the Main menu.
Page menu display position: Used to set the position at which the page menu is displayed.
Displays distance/angle information when possible.:
Used to set the display of information about the length (distance) and angle in line or figure drawing.
Save background image and user stamp when saving file:
Used to select whether to save the background image and user stamp used during drawing when saving the file in the
pwb format (file for built-in WhiteBoard).
Save file to internal memory (whiteboard, captured image):
Used to set saving of target data to internal memory in this unit.
Captured image save format: Used to set the format to save screen-captured images.
Switches input when launching Comparison mode.:
Used to set the input automatically switched to when the comparison mode application is started up.
Internal memory ***/*** Mbyte: Displays the utilization and total capacity of the built-in memory.
Whiteboard background
- Whiteboard mode background color (default): Used to set the background colour applied in WhiteBoard mode.
- Graph paper size: Used to set the grid cell size of the background graph paper.
- Whiteboard background: Grid 1/Grid 2 size: Used to set the cell size.
- Number of lines in English notebook: Used to set the number of lines to display on one screen of the
background English note.
- Number of staff lines: Used to set the number of lines to display on one screen of the
background staff notation.
- Horizontally ruled notebook size: Used to set the size of the horizontal ruled note.
- Vertically ruled notebook size : Used to set the size of the vertical ruled note.
Stamp / background selection:
Used to switch displayed stamp or background according to the intended use of this unit.
Note
● Selecting [Captured image save format] for [PNG] makes the saving / reading speed slow.
● When data is saved with [Save background image and user stamp when saving file] set to [Off], those images will
not be displayed when data reference is made on another unit.
■
Memory usage and warning
It operates as follows depending on the amount of memory used.
When memory usage exceeds 60%:
The following warning message will be displayed.
[Memory usage has exceeded 60%. Data cannot be written if it exceeds 80%.]
When memory usage exceeds 80%:
The following warning message will be displayed.
[Memory usage has exceeded 80%. You can continue using the whiteboard, but cannot add pages or write data. Save
the file and restart the whiteboard.]