Basic controls – Panasonic TH-86EQ2W 85.6" 4K Digital Signage Display User Manual

Page 33

Advertising
background image

33

English

Basic Controls

AC socket outlet

Remote control sensor / Power Indicator

Main power switch (

)

(Back of the unit)

Main Power On / Off button (

) (Back of the unit)

AC cord

(supplied)

Operate pointing the remote control directly at the unit’s

Remote Control Sensor.

Note

●

Do not put an obstacle between the remote control

sensor of the main unit and the remote control.

●

Operate the remote control in front of the remote

control sensor or from the area where the sensor can

be seen.

●

When directly aiming the remote control at the remote

control sensor of the main unit, the distance from

the front of remote control sensor should be approx.

7 m or less. Depending on the angle, the operation

distance may be shorter.

●

Do not subject the remote control sensor of the main

unit to the direct sunlight or strong fluorescent light.

1

Connect the AC cord plug to the

Display.

(see page 19)

2

Connect the plug to the socket outlet.

Note

●

Main plug types vary between countries. The

power plug shown at left may, therefore, not be

the type fitted to your set.

●

When disconnecting the AC cord, be absolutely

sure to disconnect the AC cord plug at the

socket outlet first.

●

The settings may not be saved if the power plug

is disconnected immediately after changing

settings with on-screen menu. Disconnect the

power plug after a enough period of time. Or,

disconnect the power plug after turning the

power off with the remote control, RS-232C

control or LAN control.

3

Turn ON ( ) the <Main power switch

(

)> on the unit.

4

Press the <Main Power On / Off

button> (

) on the unit to turn the

power of the unit on.

●

Power Indicator: Blue (Picture is displayed.)

●

When the power of the unit is on, the power

indicator lights up and remote control operation is

possible.

●

When the power indicator is lit, it is not necessary

to press the <Main Power On / Off button> (

)

on the unit. Operate the remote control so that the

power indicator turns blue (picture is displayed).

Advertising