Panasonic TH-86EQ2W 85.6" 4K Digital Signage Display - Manual (Page 124)

124
English
■
Schedule play mode
When [USB media player] is set to [Enable] and
[Schedule play function] is set to [Enable], this unit
enters schedule play mode, and the content is played
back according to the set schedule.
If it entered schedule play mode at the time when the
schedule is already specified, the unit operates as
follows according to [Play mode] (see page 80).
• In [Individual play] mode
Playback starts from the beginning of the specified
schedule.
• In [Synchronize play] mode
Synchronized playback starts at the next content
start time.
Note
● When the unit enters schedule play mode, the input is
automatically switched to [USB] or [Internal Memory].
● Some of the main unit’s functions are disabled during
schedule play mode.
● If the input is switched during schedule play mode,
the schedule playback is suspended.
To resume the schedule playback
• Switching the input to [USB] or [Internal Memory]
will resume playback from the next schedule.
• If the power is turned off using the remote control,
the power is turned on at the next power-on
schedule. Then the schedule playback starts.
The schedule playback is restored by the above
operations.
● When <RECALL> is pressed during schedule play
mode, the [Schedule play mode] display appears.
● The scenario playback function of the media player
does not operate in [Schedule play mode].
■
Content playback
Specified content is played back at the time set for
schedule.
Playback files in the following formats are supported.
Still pictures
Extension Format Limitation
jpg/
jpeg/
jpe
JPEG Number of pixels:
Minimum 32 x 18
Maximum 4 096 x 4 096
(supports baseline only)
YUV format:
supports YUV444, YUV442
and YUV440
Colour mode:
supports RGB only
bmp Windows
Bitmap
Number of pixels:
Minimum 32 x 18
Maximum 2 000 x 2 000
(1 bit, 4 bits, 8 bits, 24 bits)
Following formats are not
supported:
Run-length encoding, bit
field, top-down, transparent
data
Motion pictures
Extension Codec
Video Audio
avi H.264/MPEG4
AVC
MPEG4 Visual
VC-1 Advanced
VC-1 Simple &
Main
AAC-LC/LPCM/MP3
WMA Standard
wmv H.264/MPEG4
AVC
MPEG4 Visual
VC-1 Advanced
VC-1 Simple &
Main
LPCM/MP3/
WMA Standard/WMA9/
WMA10 Pro
mp4 /
mov
H.264/MPEG4
AVC
MPEG4 Visual
H.265/HEVC
AAC-LC/HE-AAC/MP3
Note
● Some files may not be played back even if they are
supported formats described above.
● As for restrictions for movie codecs of playback files,
see “Play file” (see page 116).
● If the contents of setting files (under [PRIVATE]
folder) created and delivered using “Content
Management Software” are changed, operations are
not guaranteed.
● During a time period for which no content is set, the
screen is black with nothing displayed.
During this period, the [Schedule waiting] message is
displayed on the upper right of the screen.
To hide this display on the screen, set [Setup] - [OSD
settings] - [Onscreen display] to [Off].
● For details of each CODEC of content, check the
restriction items for playback content of the USB
media player function.