Panasonic TH-86EQ2W 85.6" 4K Digital Signage Display - Manual (Page 168)

168
English
Corresponding
signal
Resolution
(Dot)
Scanning
frequency Dot clock
frequency
(MHz)
Format * 2
Plug and Play-supported signal * 5
Horizontal
(kHz)
Vertical
(Hz)
HDMI USB-C
DL DP 4K/
60p * 6
4K/
30P 2K
4K/
60p
4K/
30P 2K
1440 x 900/60 1 440 x 900 55.47 59.90 88.75 R/H/UC/DL
1440 x 900/60 1 440 x 900 55.92 60.00 106.47 R/H/UC/DL
1600 x 900/50 1 600 x 900 46.30 50.00 97.05 H/UC/DL
1600 x 900/60 1 600 x 900 60.00 60.00 108.00 H/UC/DL
1600 x 900/60 1 600 x 900 55.99 59.95 118.25 H/UC/DL
1600 x 900/60 1 600 x 900 55.92 60.00 119.00 H/UC/DL ○ ○ ○
1600 x 1200/60 1 600 x 1 200 75.00 60.00 162.00 R/H/UC/DL
1680 x 1050/60 1 680 x 1 050 65.29 59.95 146.25 R/H/UC/DL
1920 x 1080/60 1920 x 1 080 * 3 66.59 59.93 138.50 R/H/UC/DL
1920 x 1080/60 1 920 x 1 080 67.50 60.00 148.50 R/H/UC/DL ○ ○ ○ ○ ○ ○ ○ ○
1920 x 1200/60 1 920 x 1 200 74.04 59.95 154.00 R/H/UC/DL ○ ○ ○ ○ ○ ○ ○ ○
1920 x 2160/60 1 920 x 2 160 133.29 59.99 277.25 H/UC
1920 x 2160/60 1 920 x 2 160 135.00 60.00 297.00 H/UC
2560 x 1440/60 2 560 x 1 440 88.79 59.95 241.50 H/UC ○ ○ ○ ○
2560 x 1600/50 2 560 x 1 600 82.37 49.95 286.00 H/UC
2560 x 1600/60 2 560 x 1 600 98.71 59.97 268.50 H/UC
3840 x 1080/60 3 840 x 1 080 66.63 59.97 266.50 H/UC
3840 x 2160/30 3 840 x 2 160 65.69 29.98 262.75 H/UC ○ ○
3840 x 2160/60 3 840 x 2 160 133.31 60.00 533.25 H/UC ○
* 1: Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
* 2: Signals to represent formats are as follows.
R : D-sub RGB (PC IN)
Y : YP
B
P
R
/YC
B
C
R
(PC IN)
H : HDMI (HDMI IN 1, HDMI IN 2, HDMI IN 3)
UC : USB-C DP Alt Mode (USB-C HOST)
DL : DIGITAL LINK (DIGITAL LINK IN) of DIGITAL LINK Terminal Board
* 3: Based on VESA CVT-RB (Reduced Blanking) standard
* 4: YC
B
C
R
4:2:0 format only supported.
* 5: Signals with ○ in the Plug and Play-supported signal column are the ones written in EDID (Extended Display
Identification Data) of this unit.
For signals without ○ in the Plug and Play-supported signal column, resolutions may not be selected on the PC
side even if this unit supports those signals.
* 6: 4K/60p means 4K/60p/HDR and 4K/60p/SDR.
Note
● An auto detected signal format may be differently displayed from the actual input signal.
● [ i ] shown after the number of dots of resolution means the interlace signal.
● When 1080/30PsF signal and 1080/25PsF signal are input, they are processed as 1080/60i signal and 1080/50i
signal, and then displayed.
● When 1920 x 2160/60 signal (dot clock frequency 297.00 MHz, DIGITAL LINK format) is input, 3840x2160/60p is
displayed.