Panasonic TH-86EQ2W 85.6" 4K Digital Signage Display - Manual (Page 98)

98
English
■
Detail control page
The detailed functions of the unit can be performed.
Click [Display control
] → [ Advanced control].
Enter a command. Use the same command used for
the serial control.
Response from the unit is displayed.
Command is sent and run.
Note
● After the settings are changed, it may take a while till
the display status is displayed.
■
Detailed set up
When connecting by logging in with administer
privileges, you can make detailed settings for network
related to display.
■
LAN settings page
1 Click [Detailed set up] in the menu.
2 Click [Next].
The settings window appears, showing the current
settings.
• To change the LAN settings, click [Change].
• To return to the previous window, click [Back].
3 Complete the detailed settings and
click [Next].
In this window, DNS server and HOSTNAME (up
to 20 characters) settings can be made as well as
address information set on the [LAN setup] menu of
the display.
After all required items have been entered, click
[Next]. Then, a confirmation window appears when
[EAP] is set to [NONE].
When [EAP] is set to items other than [NONE], the
next page appears.
Note
● When [DHCP ON] is set, if the DNS server
address is acquired from the DHCP server, the
acquired address is valid.
When [EAP] is set to items other than [NONE] or [EAP-
TLS]
When [EAP] is set to [EAP-TLS]
[USER NAME]
Enter the user name for authentication with one-byte
alphanumeric characters (excluding space). (Up to
64 characters)
[PASSWORD]
Enter the password for authentication with one-byte
alphanumeric characters. (Up to 64 characters)
[Back], [Next]
Click [Back] to return to the previous screen.
Click [Next] to display the screen to confirm the
setting contents.