Panasonic TH-86EQ2W 85.6" 4K Digital Signage Display - Manual (Page 86)

86
English
■
[No signal warning timing]
Set up the detecting time for no signal warning.
(Range: 01 ‒ 60, Interval: 1 minute)
■
[No signal error]
When set to [On], the display sends out the no signal
error.
■
[No signal error timing]
Set up the detecting time for no signal error.
(Range: 01 ‒ 90, Interval: 1 minute)
● The warning of [No signal warning] and the error
of [No signal error] are not sent when the no signal
state is detected through any of the following
functions:
[No signal power off], “Power management”
function for each input (see page 61)
Setting Example:
● If there is no signal when [HDMI1] is input, [HDMI1
power management] is activated first and the
Display enters the standby mode.
[No signal warning timing]: 5 minutes
[No signal error timing]: 10 minutes
[HDMI1 power management]: [On] (60 seconds)
Note
● The [No signal error timing] cannot be set
shorter than [No signal warning timing].
● Even when a USB memory or internal memory
is connected, if there is no playable file, the unit
determines no signal is present.
■
[Temperature warning]
When set to [On], the display sends out the warning
message.
Mode settings
Sets various operations.
[Mode settings] - sub menu screen
Mode settings
Display orientation
Image rotation
PC input mode
POWER button control setting
Power LED light-up setting
Landscape
Off
Off
Off
PC
Use memory select
USB-C/SLOT select
USB (DEVICE) connect setting
LAN terminal setting
USB
Auto
USB-C+SLOT
LAN terminal
■
[Display orientation]
Sets the on-screen display orientation in the portrait
setting.
[Landscape]:
On-screen display angle is for horizontal
installation.
[Portrait]:
The on-screen display rotates clockwise by 90
degrees for easy view in the portrait setting.
Power indicator
Note
● In the portrait setting, the power indicator shall come
to the upper side.
■
[Image rotation]
Sets the picture rotation in the portrait setting.
[Off]:
Pictures are not rotated.
[180 degrees]:
Pictures are rotated 180 degrees.
Setting [Position] when [Image rotation] is set to
[180 degrees]
When [Image rotation] is set to [180 degrees], the
adjustment direction becomes opposite of that in [Off]
state. (see page 43)
Note these points for adjustment.
■
[POWER button control setting]
Sets the operation when the power button ( ) of the
main unit is pressed.
[Off]:
Turns off the power.
[Standby]:
Enters the standby mode.
■
[Power LED light-up setting]
Sets the display operation of the power indicator of the
main unit.
[Off]:
Does not illuminate.
[On]:
Illuminates according to the power status.
■
[PC input mode]
Set this mode according to the input signal format of the
PC IN terminal.
[PC]:
RGB signal
[PC[YP
B
P
R
]]:
YP
B
P
R
/YC
B
C
R
signal