Panasonic TH-86EQ2W 85.6" 4K Digital Signage Display - Manual (Page 92)

92
English
2. When [LAN control protocol] is set
to [Protocol 2].
Communicates with the same protocol as that of a
Panasonic projector
Connection method
1 Obtain the display’s IP address and the port number
(Default is 1024), and request connection to the
display.
The IP address and the port number can be obtained
from the following menus.
• IP address:
[Setup
] → [ Network settings ] → [ LAN setup] or
[Network status]
• Port number:
[Setup
] → [ Network settings ] → [ LAN setup]
● For more detail of the settings, see page 76.
2 The display responds.
Response data
Data part Space Mode Space
Random
number
part
Last
terminal
symbol
[NTCONTROL]
(ASCII
character
string)
[ ]
0x20
[1]
0x31
[ ]
0x20
[zzzzzzzz]
(ASCII
code
hex
number)
(CR)
0x0d
9 bytes 1 byte 1 byte 1 byte 8 bytes 1 byte
Mode: 1 = Protect mode
3 Hash the following data with the MD5 algorithm, and
generate a 32-byte hash value.
[xxxxxx:yyyyy:zzzzzzzz]
xxxxxx :
User name set for [Administrator account settings]
yyyyy :
Password set for the above [Administrator
account settings]
zzzzzzzz :
8-byte random number obtained in step 2
Command transmission method
Transmit in the following command format
Transmitted data
Header Data part
Last
terminal
symbol
Hash value
(see
“Connection
method”)
‘0’
0x30
‘0’
0x30
Control
command
(ASCII
character
string)
(CR)
0x0d
32 bytes 1 byte 1 byte Undefined 1 byte
Received data
Header Data part
Last
terminal
symbol
‘0’
0x30
‘0’
0x30
Control
command
(ASCII
character
string)
(CR)
0x0d
1 byte 1 byte Undefined 1 byte
Error response
Error message
Last
terminal
symbol
“ERR1” : Undefined control
command
(CR)
0x0d
“ERR2” : Out of parameter range
“ERR3” : Busy status or
reception invalid period
“ERR4” : Timeout or reception
invalid period
“ERR5” : Wrong data length
“ERRA” : Mismatching of
password
4 bytes 1 byte
Note
● With some of the commands, a part of character
string of the transmitted data may not be included in
the received data.
● Consult your local Panasonic dealer for detail
instructions on command usage.
For more details, visit the following web site.
https://panasonic.net/cns/prodisplays/