Panasonic TH-86EQ2W 85.6" 4K Digital Signage Display - Manual (Page 71)

71
English
Whiteboard settings
Configure settings for the WhiteBoard function.
[Whiteboard settings] sub menu dialog
Whiteboard
Whiteboard
Bottom
On
Control menu
Menu lock
Quick input settings
Off
Centre Shrink position
■
Whiteboard
[Off]: The WhiteBoard function is disabled.
[On]: The WhiteBoard function is enabled.
■
Control menu
[Top]: The Control menu is displayed at the top
of the screen.
[Bottom]: The Control menu is displayed at the
bottom of the screen.
■
Shrink position
Sets the position where the Control menu is
minimized.
[Left]: Sets the shrink position to the left.
[Centre]: Sets the shrink position to the centre.
[Right]: Set the shrink position to the right.
[Left2]: Sets the shrink position to the left (one
level inside).
[Centre2]: Sets the shrink position to the centre (one
level inside).
[Right2]: Sets the shrink position to the right (one
level inside).
■
Menu lock
[Off]: Enables the operation for the menu
display button in the Control menu.
[On]: Disables the operation for the menu
display button in the Control menu.
Menu display button
Note
● Regardless of whether [Menu lock] is set to Off/On,
operations after the menu is displayed by remote
control operation are valid.
■
Quick input settings
Sets the input signal assigned to the input selector
button on the Control menu.
Quick input settings
Quick input 1
USB-C
HDMI1
Quick input 2
Quick input 4
Quick input 3
WHITEBOARD
MEMORY VIEWER
Video conference mode settings
Shortens the delay time from input to video display to
configure the setting suitable for a video conference
device connected externally . Accordingly, functions to
change the picture size and position can no longer be
used.
[Video conference mode settings] - submenu screen
Video conference mode settings
HDMI1
HDMI2
HDMI3 On
Off
Off
USB-C Off
[HDMI1]: Setting this to [On] configures the setting of
input from the HDMI IN 1 terminal suitable for
video conferences.
[HDMI2]: Setting this to [On] configures the setting of
input from the HDMI IN 2 terminal suitable for
video conferences.
[HDMI3]: Setting this to [On] configures the setting of
input from the HDMI IN 3 terminal suitable
for video conferences.
[USB-C]: Setting this to [On] configures the setting
of input from the USB-C HOST terminal
suitable for video conferences.
Note
● [Video conference mode settings] and [Frame control]
cannot be used simultaneously. Only one of them can
be used.
● Aspect is [Full].
● The adjustment value of [Position] is invalid.
● [Display orientation] is [Landscape].
● The following functions cannot be used.
• Digital zoom
• [Screensaver] - [Wobbling]
• [Multi display settings]
• [Portrait settings]
• [Image rotation]
● The following WhiteBoard-related functions cannot
be used.
• Built-in WhiteBoard
• Comparison mode
• Capture
• Zoom