Panasonic TH-86EQ2W 85.6" 4K Digital Signage Display - Manual (Page 40)

40
English
Digital ZOOM
Select the screen areas (25 areas) to zoom in, and
zoom in the selected image areas Ч2, Ч3 or ×4.
(Operate using the remote control. The buttons on the
unit cannot be used for some operations.)
Enter
Select
Exit
Digital Zoom
1 Set the digital zoom mode.
Press <ZOOM>.
x 1
Exit
ENTER
RETURN
The screen aspect is set to [Full], and the digital
zoom operation guide is displayed.
2 Select the image areas to zoom in.
Select pressing .
x 1
Exit
ENTER
RETURN
Digital Zoom operation guide
3 Switch the zoom ratio for the screen
areas.
Switches every time <ENTER> is pressed.
Ч1 Ч2 Ч3 Ч4
Ч1 Exit ×2 Exit ×3 Exit ×4 Exit
● If no operation is performed for the period set for
[Menu display duration] (see page 83 ) (5 ‒ 180
seconds) when the zoom ratio for the screen is
“×1” , the unit exits the zoom mode.
● If no operation is performed for approx. 3 seconds
when the zoom ratio for the screen is “Ч2”,
“Ч3” or “×4” , the digital zoom operation guide
display disappears. Pressing any of the
buttons displays the guide again.
4 Exit the digital zoom mode.
Press <RETURN> to exit the mode.
The screen returns to the previous state just before
entering the digital zoom mode, and the digital zoom
operation guide display disappears.
● Press any of the following buttons to exit the
mode. Then, the operation of the pressed button
is performed.
Remote Control:
<AUTO SETUP> <POSITION> <PICTURE>
<INPUT> <SETUP> <SOUND> <DEFAULT>
<RECALL> <MUTE> <ASPECT>
<OFF TIMER> <FUNCTION> <VOL +>
<VOL - > <1> ‒ <6>
Unit:
<INPUT (Unit)> <MENU (Unit)> <+ (Unit)>
<- (Unit)> <ENTER (Unit)>
● When the screen saver timer starts up, the digital
zoom mode finishes.
● When the power is turned OFF, a force-quit is
performed.
• When the power is turned OFF by pressing the
<Standby (ON/OFF) button>.
• When the display is turned OFF at the <Main
Power On / Off button>
• When the power is turned OFF by the off-timer
• When the power is turned OFF by [No signal
power off] or “Power management”.
Note
● In the following cases, the digital zoom mode is not
available.
• When [Multi display settings] - [Multi screen
display] is set to [On]
• When [Portrait settings] - [Portrait display] is set
to [On]
• When the screen saver is in operation
• When Screen Transfer / USB / MEMORY VIEWER
/ WHITEBOARD input is selected.
● The zoomed image is rougher than the original
image.
● For multi display use, use the functions in [Multi
display settings]. (see page 71)