Panasonic TH-86EQ2W 85.6" 4K Digital Signage Display User Manual
Page 89
89
English
■
[SLOT standby]
Sets the power supply status for the SLOT when the
unit is in standby mode.
[Off]:
The power is not supplied to the SLOT when the
power is turned off by the remote control, etc.
[On]:
The power is supplied to the SLOT when the
power is turned off by the remote control, etc.
Note
●
When [SLOT standby] is set to [On], the power
indicator in standby mode lights purple.
●
When [HDMI-CEC control] is set to [Enable], this
menu will be greyed out and cannot be set. (see page
65)
●
When the DIGITAL LINK Terminal Board is used, set
[SLOT standby] to [On].
■
[SLOT power on]
Starts up the power of the SLOT.
■
[SLOT forced termination]
Forcibly turns off the power of the SLOT. Use this only
when the power cannot be turned off manually due to
the problem of the operating system, etc.